Model GH2010

Flip your gangway up and over onto the dock with the Gangway Hinge. Use it to prevent access to the dock, to make lawn mowing easier or to make towing the dock easier. (Hardware included)

Model WP2x12

Our treated lumber gangways provide lasting support for the transition from land to water. The lumber is sturdy, safe and is available in various lengths. For a quote e-mail us at  info@connectadock.com with the length required.

Model RK1020

Provide a safe and stable transition from stationary to floating docks with the Roller Kit. The easy-rolling wheel ensures that the gangway moves smoothly along the dock's surface when water levels fluctuate.

Model GP1002 (2")

Model GP2003 (3") Note:2000 Series-High Profile only

The simple and quick way to anchor: cut poles to length, insert through Pole Connector and drive into the lake bed. Top with a Pole Cover for an attractive finish. For a quote e-mail us at  info@connectadock.com with the length required.

Model PP1002

Drive poles into the lake bed with the Pole Pounder. (Accepts up to a 3" outside diameter pole)

Model PR1002

Use this convenient lever to remove anchoring poles. Heavy-duty stand and vise make quick work of dislodging 2" or 3" poles. (Pole Not included)

Model PA1002

Make it easy to install/remove your pole anchors with the Pole Auger (one per pole). Attach the auger to the bottom of the pole with bolt, slip a Pole Connector over the top of the pole and attach to dock. Drill a hole through the top of the pole, insert a dowel (not included) and turn to auger the pole into the lake bed. Remove pole by turning the dowel in the opposite direction. (hardware included)

Model DM1002 Note:1000 Series-Low Profile

Model DM2002 Note:2000 Series-High Profile

Anchor your dock without poles. Slip the long end of the Dead Man Collar in the Pole Connector on the side of the dock and rig a weighted chain through the bottom of the collar. Fasten the chain by setting a link in the groove in the top of the collar. (Chain and weight not included)

Model SAB1020

Anchor your dock without poles are weights with these fittings. The Stiff Arm Bracket is attached to the dock and is fitted to a connecting pole. The other end of the connecting pole attaches to a ground anchor on shore.

Model SAF1020

Anchor your dock without poles are weights with these fittings. The Stiff Arm Bracket is attached to the dock and is fitted to a connecting pole. The other end of the connecting pole attaches to a ground anchor on shore.

Model DW1010 Note:1000 Series only

Ideal for anchoring swim platforms, the Deep Water Hardware set includes eyebolts and fasteners for attaching weighted chains to the underside of the dock. (Hardware included)

Attach your floating dock to a permanent structure with the Piling Loop. Bolt the bracket to the deck of the dock, loop the support around the piling (up to 18" (45.72 cm) in diameter) and connect back to the bracket. Great for fluctuating water levels. (Hardware included)